#SPECTRA PRECISION HOW TO#
#SPECTRA PRECISION MANUAL#

In Manual mode (horizontal), the Y-axis can be sloped by pressing the Up and Down Arrow-buttons on the laser or remote control. Manual mode is indicated by the flashing (once every second) red LED (e). Pressing and releasing Manual button activates/deactivates the manual mode regardless if set up horizontal or vertical. Note: The rotation control button can be used to stop the scan mode.

For the first 4 seconds, the scan line moves slowly than faster. When set up vertical, pressing and holding button Left/Right moves the scan line into the right/left direction regardless if in automatic or manual mode.

When used in automatic vertical mode, pressing and holding button Up/Down moves the scan line counterclockwise/ clockwise. Press and hold button Left/Right moves the scan line to the right/left direction. When working in horizontal automatic mode, press and hold button Up/Down to increase/decrease the line size in 5° increments. Quickly press and release the Scan button to toggle between the pre-selected scan sizes 5°, 15°, 45°, 90°, 180° and 0 regardless if the unit is in automatic or manual mode. Scan mode can be selected using the Scan button as well as using the RC402N menu. When set up vertically at 0 rpm, buttons Up/Down can be used for moving the beam clockwise/counterclockwise and to align the rotor vial. Note: The zone-scan button can be used to stop the beam's rotation.Īt 0 rpm, buttons Left/Right move the beam to the left/right side. When set up horizontally in automatic mode, using buttons Up/Down increases/decreases the rotor speed from 10 to 80 and then continuously in 10 rpm increments up to 600 rpm. At 0 rpm, the beam stops automatically close to the +Y- axis center position. Repeatedly pressing the Rotation button toggles through 0, 10, 80, 200, 600 rpm regardless if the unit is in automatic or manual mode. Rotation speed can be selected using the Rotation button as well as using the RC402N menu. To ensure your former elevation, now you have to check or arrange the exact height. When entering into alert mode, the rotation stops, the laser beam turns off, a warning sound is heard and the HI/MAN LED (e) flashes 2 x per second. The HV302/HV302G is a class 3A/3R laser ( 30 mm/10 m put the unit into alert mode because they are generally caused by a disturbance that could lead to inaccurate measurements. Do not remove warning labels from the unit. Use of this product by people other than those trained on this product may result in exposure to The HV302/HV302G laser is an easy-to-use tool that allows you to take accurate horizontal/vertical measurements, 90°- and plumb beam transfer.įor hazardless and safe operation, read all the user guide instructions.

Thank you for choosing one of the Spectra Precision Lasers from the Trimble family of precision lasers. Pairing the remote control with the transmitterĬhecking Calibration of the Y- and X-AxesĬhecking Calibration of the Z-(vertical) Axis Turning On/Off the RC402N Radio Remote Control Special Features using the optional RC402N

#SPECTRA PRECISION HOW TO#

Introduction For Your Safety Components How to Use the Laser System Powering the Laser Turning On/Off the Laser Laser Setup Standard Features Rotation Mode Scan Mode Manual Mode Y-/X-Single Slope Mode Mask mode Activating/Deactivating Standby Mode Operating Examples Determining the Height of Instrument (HI) Using the optional HL760/HL760U receiver Pairing the HL760/HL760U receiver with the transmitter File Info : application/pdf, 35 Pages, 2.07MB Document Document Spectra-Precision-HV302-Manual 1

Spectra precision